[Figure: ResultsTldr] ## Overview Vanes vary on a lot of dimensions: profile shape, length, height, thickness, stiffness, base footprint, surface finish, and more. This article looks at the two we can measure cleanly across every build in the test (length and height) and asks which one drives which performance metric. Same protocol as the rest of the vane study. Standard-speed rig: 28″ draw length, 70# draw weight, ~450gr arrows, ~290 fps out of a Hoyt AX3 33. Each build was measured on three performance axes: - **Aerodynamic Drag:** calculated drag constant from synced chronograph readings at 0.5, 30, and 60 yards. Lower is better. - **Restorative Lift:** how strongly the vane pulls the broadhead back toward the field-point baseline under simulated shooter error (induced lateral torque), measured at 70 yards with an Iron Will Wide fixed-blade head and a Gold Tip 100gr field point. The y-axis on the lift plots is the lateral offset between the broadhead and field-point groups; a smaller offset means more restorative lift. Lower is better. - **Deer-Weighted Lmax:** overall peak loudness in flight, weighted for whitetail deer hearing. Lower is better. What we're not measuring: the rest of the geometry. Profile shape (parabolic vs. shield vs. flat-back), thickness, stiffness, surface texture, base footprint, helical or offset attachment angle. All of those almost certainly move results inside a given length / height. Two vanes with identical length and height can perform very differently if they're shaped or built differently. Read the rest of this article with that in mind. For the broader vane comparison and per-build numbers, see the [Vane Performance Overview](/research/arrow-study-2026/results/vane-performance-overview/). ## Test Methods For full details on the test methods, group capture, and analysis processes, check out the [Methods](/research/arrow-study-2026/methods/) page. ## Quick Tips Hover over the dots in any plot to see the build configuration and results details. Each plot in the body sections has a fit line drawn through it. A steeper fit line means the dimension on X is doing more work on the metric on Y. A near-flat fit line means the relationship is weak. The first three plots are colored 2D views of the same dataset. The remaining plots are per-dimension scatters against each performance metric. ## Length vs. Height The three plots below show the same scatter (length on X, height on Y, one dot per vane build) recolored by each performance metric in turn. Quick visual scan of where the best builds cluster on each axis. Yellow = better. [Figure: PlotSections] ## Vane Height Holding length out of the picture, how does height alone move each metric? The three plots below put vane height on X and one of drag, restorative lift, and deer-Lmax on Y, with a fit line on each. Height moves all three metrics, but the strongest relationships are with noise (taller is louder) and restorative lift (taller has more lift). The relationship with drag is real but weaker than either of those. [Figure: PlotSections] ## Vane Length Same view, with length on X. Length is inversely related to noise (longer is quieter, the opposite direction from height) and is the stronger of the two single dimensions for predicting drag (r = 0.40 vs. 0.20 for height). The relationship with restorative lift is weak on its own (r = -0.13); length affects restorative lift mostly through the combined length × height view below. [Figure: PlotSections] ## Length × Height Length × height is a rough proxy for vane profile area. Rough because vanes aren't rectangles, so this overstates the actual area for shaped vanes by a constant factor that depends on the profile. For drag, this combined view is the best predictor of the three (r = 0.44), beating length alone (r = 0.40) and height alone (r = 0.20). For restorative lift, the combined view (r = -0.32) is weaker than height alone (r = -0.38). [Figure: PlotSections] ## Takeaway Vane height is the primary factor for steering performance. Tall vanes steer better, but they're also generally louder. Length is the moderating variable to reduce noise: longer vanes are generally quieter at the same height. Drag and restorative lift don't share the same predictor, though. For drag, length × height (the profile-area proxy) is the best summary, beating either dimension alone. For restorative lift, height by itself is the strongest predictor. In practice: pick the height that gives you the steering you need, then add length to keep it quiet. Height also has practical limits beyond aerodynamics (cable / rest clearance, face contact, etc.). A few caveats: - These are crude ways to look at vane shape and size. We are not measuring profile shape, thickness, stiffness, base footprint, surface finish, or any of the finer geometry that almost certainly moves results inside a given length / height. Two vanes with the same length and height can perform very differently. - The length × height product treats every vane as a rectangle. Real vanes are shaped (parabolic, shield, etc.), so this overstates the actual area for most builds. It's a useful proxy, not a precise measurement. - All testing was done on the standard-speed rig (~290 fps) on one type of arrow shaft. Builds that look great here may shift on a faster setup or a different arrow shaft.