# Choosing a PCA Drag Index™

Every `compute:analyze` call needs a `model` with the arrow's **PCA Drag
Index™** (`dragIndex`). The OpenAPI document has its bounds. A lower value
is sleeker; 100 is a typical hunting arrow with a field point.

## Where a value comes from

Connect doesn't return a PCA Drag Index. Your app gets one of three ways:

- **Ask your user for their PCA Drag Index™.** A value they enter may be
  shown back to them as entered. Our own apps don't show a user their
  value today, so most users won't know one: ask them to enter it only
  if they have it, and offer the table otherwise.
- **Fill in the build from PCA's published table**, below. A value from it
  may be shown as "PCA Drag Index™" without the "estimated by YourApp"
  label.
- **Show your own estimate, labeled as yours**, for a build the table
  doesn't cover: "PCA Drag Index™ (estimated by YourApp)". Never derive an
  estimate by systematically querying the API.

A value the user enters, or one resolved from their own sight-in, is
better than the table. Prefer it when you have it.

## PCA's published estimates

**PCA Drag Index™ estimates for typical 3-fletch hunting arrows, 27–29 in**

| Shaft | Vanes | Field point | Mechanical / hybrid | Fixed, cut ≤ 1⅛ in | Fixed, cut > 1⅛ in |
|---|---|--:|--:|--:|--:|
| Micro (3–4 mm) | Low profile | 82 | 99 | 104 | 114 |
| Micro (3–4 mm) | Standard / high profile | 89 | 106 | 112 | 122 |
| Small (5 mm) | Low profile | 91 | 110 | 116 | 126 |
| Small (5 mm) | Standard / high profile | 99 | 119 | 125 | 134 |
| Standard (6–6.5 mm) | Low profile | 93 | 112 | 120 | 128 |
| Standard (6–6.5 mm) | Standard / high profile | 100 | 120 | 127 | 135 |

4-fletch: add 5.

Map a build to one row and one column:

- **Shaft**, by the manufacturer's outside diameter: micro is 0.255 in or
  less; small is over 0.255 to 0.285 in; standard is over 0.285 to
  0.320 in. Above 0.320 in (aluminium, indoor, traditional) isn't
  covered.
- **Vanes**, by the manufacturer's maximum height: low profile is under
  0.42 in; standard / high profile is 0.42 in or more. Feathers aren't
  covered.
- **Point:** field point means any field, bullet or target point, not a
  practice broadhead. Mechanical / hybrid means the blades are closed in
  flight, including hybrids with fixed bleeders. Fixed: split on the
  published cut diameter at 1⅛ in (1.125 in). If the cut is unknown, use
  the "≤ 1⅛ in" column.
- Don't adjust for arrow length (27–29 in), point weight, arrow weight, or
  offset or helical up to 4°.

Use the table to fill in a user's build, and don't republish it or publish
your own table of values ([Developer Agreement](/developer-agreement/#attribution)).
[Brand and Attribution](/documentation/developers/brand/#pca-drag-index)
covers how to name and label the value.
